|
A JP1 remote is a type of universal remote, usually with a six-pin interface connector labeled "JP1" in the battery compartment, manufactured by Universal Electronics Inc. The JP1 interface allows the remote to be reprogrammed, adding new code lists and functions. Home theater hobbyists use JP1 to avoid obsolescence. Most JP1 remotes are capable of advanced functions like remapping keys and macros. Some models can be updated over the telephone to add new code lists. == JP1 Remote controls == All JP1 remotes are made by Universal Electronics, Inc. UEI sells various models under their One For All brand name, and supplies remotes to consumer electronic manufacturers such as Radio Shack, Sony, and Sky, as well as North American cable TV providers such as Comcast, Rogers, Cox, Shaw, Charter and Time Warner. On printed circuit boards the marking "JP1" is a common abbreviation of "Jumper 1", i.e. the first (and for most remotes, ''the only'') jumper on the board. Perhaps in recognition of this custom, later models are labeled "JP1.x", where "x" is 1, 2, or 3, depending on the type of processor used. Earlier JP1 circuit board designs employ an EEPROM memory chip. Later designs employ processors with flash memory. 抄文引用元・出典: フリー百科事典『 ウィキペディア（Wikipedia）』 ■ウィキペディアで「JP1 remote」の詳細全文を読む スポンサード リンク
|